Downloads

3D Explore

Rigaku is dedicated to our customers and their research activities.

Together with our training classes, demonstrations and our strong service team, Rigaku is always willing to go the extra mile for our customers.

If there are any questions, concerns or general advice, please feel free to contact anyone at Rigaku.

We always have time to listen.

Home > Downloads > Software > 3D Explore

	Request information
	Printer-friendly

Product in the spotlight

Three dimension display and analytical software 3D Explore

3D Explore Ver. 2.3 is available now. (October 25, 2006)

If you own 3D Explore Ver. 1.0, 2.0, 2.1, or 2.2, you are eligible for a free upgrade to Ver. 2.3.
(If you would like an upgrade on a CD-ROM (not free of charge), please contact us.

Download the free upgrade

In order to download and use 3D Explore Ver. 2.3, you need to accept the following license agreement.

Software License Agreement

IMPORTANT - Read the following License Agreement carefully.

This License Agreement (hereafter, referred to as the "Agreement") is a legal agreement between you (either an individual or a corporation) and RIGAKU Corporation (hereafter, referred to as "RIGAKU") for the RIGAKU software product.  The software product includes computer software, and also includes information or electronic documentation provided online, media associated thereto, printed materials (documentation such as a manual) and trademarks (hereafter, referred to as "SOFTWARE PRODUCT").  By installing, copying or otherwise using the SOFTWARE PRODUCT or the UPGRADE PRODUCT (defined below), you agree to be bound by the terms of this Agreement.  If you do not agree to the terms of this Agreement, RIGAKU shall not license you to install, use or copy the SOFTWARE PRODUCT.  Moreover, by installing, copying or otherwise using another component of the UPGRADE PRODUCT or the SOFTWARE PRODUCT separately received as a part of the SOFTWARE PRODUCT (hereafter, referred to as the "UPGRADE PRODUCT"), you agree to be bound by the additional license terms accompanying the UPGRADE PRODUCT.  If you do not agree to the additional license terms, RIGAKU shall not license you to install, use or copy the UPGRADE PRODUCT.
In addition, no condition of "license" specified on any printed material other than this Agreement or on the setup screen of any software product and so on shall not be applied, and only the conditions of this Agreement shall be applied.

1.Grant of license
*Software
You may install and use one copy of the SOFTWARE PRODUCT on a single computer.  However, as for the SOFTWARE PRODUCT allowing copies thereof to be installed on a plurality of computers respectively, you may make the allowed number of copies.

*Use of a network
In the case where the SOFTWARE PRODUCT has a function of being available from other computers on a network, you may use the SOFTWARE PRODUCT on the respective computers.  In that case, it is necessary that the use of the network for the SOFTWARE PRODUCT is licensed by RIGAKU.

*Backup copy
You may make one copy of the SOFTWARE PRODUCT only for the backup purposes.  In addition, you may preserve the backup copy but may not use it for any purpose other than restoration of the SOFTWARE PRODUCT.

2.Other rights and limitations
*Limitations on reverse engineering, decompilation and disassembly
You may not reverse engineer, decompile or disassemble the SOFTWARE PRODUCT.

*Rental and resale
You may not rent, lease or resell the SOFTWARE PRODUCT to any third party without permission of RIGAKU.
*Support service
RIGAKU may provide you with support service for the SOFTWARE PRODUCT (hereafter, referred to as "SUPPORT SERVICE").  What is provided as part of the SUPPORT SERVICE shall be deemed as a part of the SOFTWARE PRODUCT to which the terms and conditions of this Agreement shall be applied.
*Assignment of the software
You may perpetually assign the SOFTWARE PRODUCT with permission of RIGAKU, provided that, in that case, you will destroy all the copies thereof and assign all of the SOFTWARE PRODUCT (including all the components, media, documentation such as the manual, the UPGRADE PRODUCTs and this Agreement) and the assignee agrees to this Agreement.
*Termination
RIGAKU may terminate this Agreement if you fail to comply with the terms and conditions of this Agreement.  In such event, you must destroy all of the SOFTWARE PRODUCT (including all the components, media, documentation such as the manual, the UPGRADE PRODUCTs and this Agreement) and all copies thereof.

3.Upgrades
If the SOFTWARE PRODUCT is labeled as an upgrade, you must be properly licensed to use a product to be upgraded.  The UPGRADE PRODUCT shall replace the product to be upgraded or shall be added thereto.  You may use the software product acquired by the upgrade in compliance with this Agreement.

4.Copyrights and so on
Copyrights and any other right in and to the SOFTWARE PRODUCT (including but not limited to any images, photographs, animations, and text incorporated in the SOFTWARE PRODUCT), the accompanying documentation such as a manual, and any copies of the SOFTWARE PRODUCT are owned by RIGAKU or a third party from whom RIGAKU is licensed, and are protected by copyright laws and international treaty provisions.

5.Warranty
In the case where the SOFTWARE PRODUCT does not operate substantially according to the accompanying product manual or there is a physical defect on the record medium or the manual thereof, RIGAKU shall replace or repair it at no charge based on its determination within 90 days of your receipt thereof.
RIGAKU shall give no warranty of the SOFTWARE PRODUCT whatsoever, unless specified in this Agreement, including merchantability and fitness for particular purposes.
RIGAKU shall not be responsible for any damage whatsoever arising directly or indirectly related to use of the SOFTWARE PRODUCT, even if RIGAKU has been advised of possibility of such damage.

6.Other terms and conditions
RIGAKU may change the specifications of the SOFTWARE PRODUCT and the contents of the printed materials including the manual without notice in the future.

I accept the Software License Agreement
Input your name, email address, and 3D Explore catalog number. and click "Next". The catalog number is the four number, one letter, three number code written after "Cat. No." on the top page of the electronic manual.
Name	Ex) John Smith

Email address	Ex) js.com

Catalog number	Ex) 1234A567

Release history

Ver. 2.3 (October 25, 2006)
Ver. 2.2 (April 17, 2006)
Ver. 2.1 (April 11, 2005)

System requirements

Model	DOS/V compatible

OS	WindowsNT, WindowsXP, Windows2000

CPU	Pentium III or higher (The software might not work properly with compatible CPUs.)

RAM	256MB or higher

Site map

Privacy